|
|
Post by BUCKY on Jan 18, 2020 16:20:54 GMT -5
I acquired this stalled project from a member of another forum. We pulled off a trade, and now I'll see if I can kick-start this one.  It's a Little Red Wagon combined with a Dodge Viper. A bit of an unusual kitbash, so let's see where it goes! I've already started on it, and will post up some pics a bit later. |
|
|
|
Post by BUCKY on Jan 18, 2020 22:06:54 GMT -5
The original owner assembled the Viper interior shell. As you can see in the photo, there is a large void area all around it as it sits in the A-100 cab area:  In order to help it fit a bit better, I cut the interior into three parts:  I'll use strip and sheet styrene to spread things out a bit:  |
|
|
|
Post by BUCKY on Jan 19, 2020 3:21:53 GMT -5
This blank was cut from .040" sheet styrene:  Hopefully, it will be part of the interior when this is finished. LOL |
|
|
|
Post by BUCKY on Jan 19, 2020 21:36:50 GMT -5
I have the interior pieced together:    Much less gap around it, now. The black marks show where it was when I started. Here's that blank, after I worked on it a bit:  |
|
|
|
Post by BUCKY on Jan 19, 2020 21:47:17 GMT -5
A little mockup......  |
|
|
|
Post by tubbs on Jan 20, 2020 7:53:02 GMT -5
cool combination. nice work stretching that dash. that's modeling right there!!
|
|
|
|
Post by BUCKY on Jan 20, 2020 11:04:23 GMT -5
Thanks, boss! The console was a good guideline to go by.
|
|
|
|
Post by sportabout on Jan 20, 2020 16:35:50 GMT -5
Mild custom 😎. Nice work.
|
|
|
|
Post by BUCKY on Jan 20, 2020 19:10:28 GMT -5
Thanks, Sportabout!
|
|
