|
|
Post by glueandsprue on Jan 12, 2021 14:17:09 GMT -5
Looking to build a replica drag wagon. Need chassis info to complete the build. Some resin kits don't have a chassis. Advice? Thanks.
|
|
|
|
Post by dge467 on Jan 12, 2021 18:54:43 GMT -5
The Lindberg 64 Plymouth / Dodge or Moebious 65 Plymouth chassis I would think. Any of the drag race versions of these kits should have the wheels and tires plus drive trains for racing.
|
|
|
|
Post by tubbs on Jan 22, 2021 10:56:52 GMT -5
are you building the 64 fury or the 66 wagon? if its the 64, i would use the lindburg chassis, if it is the 66, i would get a chassis from either the 67 GTX or the R/T.
|
|
|
|
Post by mopar on Jan 23, 2021 8:49:52 GMT -5
Glueandsprue I built 64 Bevledere years ago with the 64 Lindburg Bevledere as a drag car tow/push car.   |
|
|
|
Post by Jcon on Jan 23, 2021 11:24:23 GMT -5
That's cool!!!
|
|
|
|
Post by DusterEd on Jan 23, 2021 19:30:40 GMT -5
Hell yeah!
|
|
|
|
Post by glueandsprue on Jan 27, 2021 13:13:38 GMT -5
Great looking wagon there! My resin 64 plymouth wagon has a twisted warp to it which narrows the body and causes the cowl to bend upward. Is the hot water treatment the best way to fix it? I also have the Lindbergh 64 hardtop as a donor kit and spare parts too. My goal is a super stock drag car. Thanks to fellow builders for all the advice.
|
|
|
|
Post by DusterEd on Jan 27, 2021 15:23:40 GMT -5
Sorry man can’t help you there. Not sure if hot water will straighten resin cast. Maybe Marty will know?
|
|
|
|
Post by mopar on Jan 27, 2021 20:58:18 GMT -5
I’m not sure if the hot water will help either I’m with Ed see if Marty knows.
|
|
