|
|
Post by tubbs on Sept 21, 2021 15:04:27 GMT -5
what is your pin vice of choice? need to get some more smaller ones and just wondered what you all use.
|
|
|
|
Post by mopar on Sept 23, 2021 7:51:02 GMT -5
Al I picked these pin vices up at Micro - Mark several years ago and have used them with out any problems. I’m currently getting a lot of use with this one on my current build. Lol. They are on page 35 if you have their mailer catalog. Hopefully this helps.  |
|
|
|
Post by topside on Sept 23, 2021 10:02:05 GMT -5
Harbor Freight has them with double-sided collets to accept a variety of bit sizes.
Also had a selection of bits from .5 mm to 3.0 mm.
All in, cheaper than breakfast...
|
|
|
|
Post by Jcon on Sept 24, 2021 17:53:34 GMT -5
I just went to our local True Value hardware store and picked one up...
|
|
|
|
Post by tubbs on Sept 28, 2021 6:55:31 GMT -5
wow! true value, i dont think we have any more of those left around here. maybe i will try ACE, i believe they are the same. they sell the bits too? lazy here, but it would be nice to have a vice for all the bits. just grab and drill.
|
|
|
|
pin vices.
Sept 28, 2021 10:07:56 GMT -5
via mobile
Post by Jcon on Sept 28, 2021 10:07:56 GMT -5
The really tiny bits you will have to get online...
|
|
|
|
Post by topside on Sept 28, 2021 11:18:29 GMT -5
Harbor Freight has a bit package that goes down to .5 mm - cheap, but I haven't broken one in plastic.
|
|
|
|
Post by BUCKY on Oct 6, 2021 23:10:02 GMT -5
I have about four different types of pin vices. I use them all, usually keeping a different size bit in each one to keep from changing them out all the time. Harbor Freight has some bits small enough that an old geezer like myself needs a magnifier to see them!
|
|
