|
|
Post by dge467 on Jul 9, 2024 15:37:17 GMT -5
Long shot here, but I am restoring a old AMT 60 Chevy wagon kit and I need the rear side glass. I tried making my own but the curved angle is hard to make. Thanks.
|
|
|
|
Post by topside on Jul 10, 2024 10:31:12 GMT -5
Can't help you with parts - don't have that - but '59s had the same roofline & windows, if that helps.
|
|
|
|
Post by BUCKY on Jul 10, 2024 11:52:48 GMT -5
I believe the '60 wagon is the only AMT ever produced, so there wouldn't be any alternative kits that I'm aware. One option would be to have them vacuum formed.
|
|
|
|
Post by topside on Jul 10, 2024 18:43:18 GMT -5
I wonder if there's some clear plastic packaging that would have the right curvature at the rear pillars ?
Or a thin document cover or sleeve from Staples/Office Depot/whatever ?
|
|
|
|
Post by dge467 on Jul 10, 2024 21:53:20 GMT -5
I have tried plastic packaging with similar shape. I was getting frustrated with it and haven't touched it in quite a while. I may take another crack at it. It just has some tough angles.
|
|
