|
|
Post by sportabout on Apr 25, 2020 17:34:45 GMT -5
I agree. There are too much gm stuff in wrong places.
|
|
|
|
Post by Jcon on Apr 25, 2020 19:18:39 GMT -5
LOL, ha, ha, ha Bucky!!!
|
|
|
|
Post by sportabout on Apr 26, 2020 14:20:01 GMT -5
Test fitting parts again.  I'm not going to use the Bonnie & Clyde license plate but the BAD-GIRL version.  |
|
|
|
Post by BUCKY on Apr 26, 2020 21:19:58 GMT -5
It's looking better every time I see it!
|
|
|
|
Post by sportabout on Apr 29, 2020 15:59:45 GMT -5
The radiator is on its place. I found it and the electric fan from my parts box.  Coolant hoses will be soft hollow rubber tubing with electric wire in it. (https://www.tedsmodelingmarketplace.com/soft-line-tubing-078-2mm-od-039-1mm-id/)  |
|
|
|
Post by Jcon on Apr 29, 2020 22:47:51 GMT -5
Nice fit!!!
|
|
|
|
Post by tubbs on May 5, 2020 7:43:06 GMT -5
The exhaust system is from Eliminator but parted to two pieces and painted with TS-83. Front pipe is made from soldering Oil filter is glued to the block too but it can't bee seen in ready model. The rear suspension is made of Pro Spotsman's front springs. Chassis is now ready. Next the radiator and hoses. Real nice job on the exhaust. Bends look identical. |
|
|
|
Post by sportabout on May 5, 2020 10:40:01 GMT -5
Thanks everybody. This will be ready soon.
|
|
